☎  +1 (248) 791-3060Providing proven robotic cutting solutions — Installing Profitability™
Contact Us →
BACA Robo SawJet M Series 240 mitering a quartzite slab on the cutting table
25%
Faster robot cycle time
Introducing the M Series 240

Cut stone.
Not profit.

Full miter capability with saw and waterjet, full-table blade coverage, automated calibration, and auto-start for 100% uptime — built for superior reliability with minimal maintenance.

Explore the M Series 240 Fly to Detroit
0HPSaw motor w/ VFD
0K PSIWaterjet cutting
10–20%Higher material yield
0%Auto-start uptime
The Lineup

Stone Fabrication Machines

From robotic SawJets to horizontal edge polishers, every BACA system is engineered to be the most productive, reliable, and lowest-cost-to-operate solution on your floor.

Mitering Robotic SawJetBACA M Series 240 mitering robotic sawjet

M Series 240

  • Saw & Jet Miter — 26 HP Saccardo spindle with VFD and 60K PSI waterjet handle full mitering in one setup.
  • Fully Shaped Parts — Cut sinks, arcs, radius, faucet holes and every other non-linear part.
  • Save on Material — The waterjet eliminates blade over-travel, increasing yield 10–20%.
View Machine
Slab ImagingBACA Iris Scanner slab imaging

Iris Scanner

  • 21K Resolution — Photograph slabs in 21K with zero light distortion.
  • Compact Layout — 65% space savings versus traditional photo stations.
  • 3D Vein Matching — MATCH software makes it easy to vein-match the most complex projects.
View Machine
5-Axis CNC SawBACA VERSA 5 5-axis cnc saw

VERSA 5

  • Automatic & Manual — Cut automatically with zero operator intervention, or process manually.
  • Fully Shaped Parts — Mill sinks, arcs, radius, faucet holes and non-linear cuts.
  • Multi-Tool — Increase the speed of processing sinks by more than 50%.
View Machine
Robotic SawJetBACA Robo SawJet 2.0 robotic sawjet

Robo SawJet 2.0

  • Blade & Waterjet — 26 HP saw motor with VFD paired with a 60K PSI waterjet.
  • Fully Shaped Parts — Cut sinks, arcs, radius, faucet holes and non-linear parts.
  • Save on Material — The waterjet eliminates blade over-travel, raising yield 10–20%.
View Machine
Dedicated Miter MachineBACA Miter X 2.0 dedicated miter machine

Miter X 2.0

  • Tighter Veins — Make tighter veins by losing less material between miters.
  • Decrease Labor — Produce consistent miters that mate up, reducing assembly time.
  • Pneumatic Clamps — Clamps prevent parts from moving and take warpage out of parts.
View Machine
CNC RouterBACA BBM Paladin cnc router

BBM Paladin

  • Precision Ball Screws — Less backlash and longer-lasting accuracy than rack and pinion.
  • Mono-Block Construction — 24,000 pounds of fully welded steel.
  • 45mm Bearings — The largest bearings in the industry for precision and longevity.
View Machine
Sink CNC RouterBACA BBM Defender sink cnc router

BBM Defender

  • 20 HP FANUC Spindle — A robust spindle ensuring maximum processing speeds.
  • Large Worktable — 72″ x 26″ table — process multiple vanities at once.
  • Precision Ball Screws — Less backlash and longer-lasting accuracy than rack and pinion.
View Machine
Edge PolisherBACA Straight 8 edge polisher

Straight 8

  • 1-Pass Polish — 8 polishing heads plus 2 chamfer positions.
  • Slab Rack — Optional slab rack helps support large pieces.
  • Feed Rates — Up to 87 IPM on 3 cm and 98 IPM on 2 cm.
View Machine
Multi Edge PolisherBACA Omega Pencil multi edge polisher

Omega Pencil

  • 1-Pass Polish — Eased edge produced at 2 ft per minute.
  • Edge Details — Flat polish, eased edge, bevel, full & half bullnose, sharknose and more.
  • High Production — Continuous processing for maximum throughput.
View Machine
Horizontal Edge PolisherBACA Penta horizontal edge polisher

Penta

  • 1-Pass Polish — 5 polishing heads plus 4 chamfer positions.
  • Multi-Function Calibrator — Remove glue from laminations or gauge the B-side to reduce shims.
  • Vertical Spindle — Smooth the B-side of stone for overhangs.
View Machine
Horizontal Edge PolisherBACA MUSA horizontal edge polisher

MUSA

  • 1-Pass Polish — 7 polishing heads plus 4 chamfer positions.
  • Multi-Function Calibrator — Remove glue from laminations or gauge the B-side to reduce shims.
  • Vertical Spindle — Smooth the B-side of stone for overhangs.
View Machine
Horizontal Edge PolisherBACA EDILPLUS horizontal edge polisher

EDILPLUS

  • 1-Pass Polish — 8 polishing heads plus 6 chamfer positions.
  • Calibrated Bevel (Patented) — Creates a constant bevel for the full length of the slab.
  • Multi-Function Calibrator — Remove glue from laminations or gauge the B-side to reduce shims.
View Machine
Multi Edge PolisherBACA Athena multi edge polisher

Athena

  • Small Footprint — Compact monobloc construction for shops with minimal floor space.
  • Easy 2 Use — Touch-screen computer with pictures of profiles for easy selection.
  • Multi Edge — Flat polish, eased edge, bevels, bullnose profiles and many more.
View Machine
Water SystemsBACA Pure Filtration water systems

Pure Filtration

  • Multiple Options — 80, 120, 180, 240 and 320 gallon-per-minute systems available.
  • Closed Loop — Fully contained water systems.
  • Hurricane Polishing — Removes fine particles to 0.75-micron for crystal-clear water.
View Machine
Slab StorageBACA Semi-Auto Tite Rack slab storage

Semi-Auto Tite Rack

  • Save Space — Reduce floor space by 75%.
  • Easy 2 Use — Bays open to allow quick, easy, safe loading & unloading.
  • Fully Customizable — Systems come in different lengths and rack sizes.
View Machine
Automated SystemsBACA Automated Slab Handling automated systems

Automated Slab Handling

  • Automatic Loading — Automatically load your saw(s) to increase safety and reduce labor.
  • Save Space — Reduce floorspace by 75%.
  • Eliminate Breakage — Increase yield with efficient inventory control.
View Machine
Automated SystemsBACA Autocut Line automated systems

Autocut Line

  • High Volume — Process up to 2,000 sq. ft. per shift.
  • Save on Labor — One operator can manage the entire system.
  • Safety & Efficiency — Robotic loading/unloading of parts increases safety.
View Machine
View All Machines
The Installed Base

Proven on production floors

0+Robo SawJets across North America
0+Miter X machines installed
0%Average material savings
3–4HRSLabor saved per slab
See It Cut

The M Series 240, in motion

Watch full saw-and-waterjet mitering, sink cuts, and complex profiles run on a single machine.

M Series 240 - Overview video thumbnail
► M Series 240 — Overview
10 Vanities in Under an Hour video thumbnail
► 10 Vanities in Under an Hour
The BACA Difference

The leader in robotic SawJet technology

BACA Systems is focused on developing innovative fabrication solutions for the countertop industry. Our team are experts in robotic automation, system integration, waterjet technology, and countertop fabrication — consistently delivering the most productive, reliable, and lowest-cost-to-operate systems in the industry.

About BACA
0%
Less floor space with automated storage
0ft²
Processed per shift on the Autocut Line
0K
Slab imaging resolution, zero distortion
0%+
Faster sink processing with multi-tool
Aerial view of the BACA Systems automated manufacturing facility
Fly to Detroit — On Us

See automation increase your profitability

Fly to Detroit, at our expense, to learn how adding the right stone fabrication equipment can be the single most important step you take to significantly increase profitability and reduce labor.

Schedule Your Visit
BACA Systems Customer Care Center team
Service & Support

Supporting you every step of the way

Your fabricating equipment drives your entire business — so when you have questions or need parts or service, getting help quickly is critical. We put customers first, building loyal relationships on trust and mutual respect.

Explore Support
“It’s enabled us to go after more builders, more commercial projects, and it has sped up our production by 50 percent.”
Todd Meyer — CEO, MEES Tile & Marble
Read the MEES Story
Proof on the Floor

Case Studies

Fabricators across North America are reinventing their shops with BACA robotics. Here’s what changed when they made the leap.

Hard Rock Stone Works case study

Hard Rock Stone Works

For Hard Rock Stone Works, the journey from startup to headliner has been an exciting one. Back in 2005, the company began with just a handful of peop…

View Case Study
MEES Tile & Marble case study

MEES Tile & Marble

After 81 years, Mees Tile & Marble is reinventing itself through the latest stone fabrication technology. CEO Todd Meyer is the third generation o…

View Case Study
Classic Granite case study

Classic Granite

Adopting the robotics technology of the future lets Classic Granite & Marble continue to dedicate itself to the quality and customer service of th…

View Case Study
Mainland Stoneworks case study

Mainland Stoneworks

Mainland Stoneworks isn’t afraid to try something new. After charting a new course to survive the crash of the housing market in 2006, the busin…

View Case Study
Creative Design Interiors case study

Creative Design Interiors

When outfitting its newest manufacturing facility, Sacramento-based Creative Design Interiors sought a high-production workflow solution providing the…

View Case Study
Emerald Coast Fabrication case study

Emerald Coast Fabrication

Emerald Coast Fabrication, a premier provider of granite, marble, and quartz countertops in the Florida Panhandle, isn’t a novice in the use of …

View Case Study
Where We’ll Be Next

Events & Seminars

Attend BACA Systems’ customized Digital Fabrication Seminars, hosted by local fabrication shops nationwide. Gain insights into the benefits of digital equipment and shop-efficiency tips — and find us exhibiting at industry tradeshows too.

All Events
Stay Sharp

Subscribe to our newsletter

Machine launches, event dates, and shop-efficiency tips — straight to your inbox.

We respect your inbox. Unsubscribe anytime.